Printronix T3308 Printer User Manual


 
3–32 Configuring the Printer
Save Configuration
You can save up to eight different configurations to meet different print job
requirements. See the “Saving Your New Configuration” section on page 3–11
for
details.
Configuration 0 is a factory-preset configuration that cannot be changed or
saved.
NOTE: If the Protect Save CFG option is enabled, the new configuration will
not
be saved unless the existing configuration has been deleted.
Print Configuration
You can output a listing of various stored printer configuration parameters. You
can print the following configurations.
Current
Factory
Power-up
All
1 – 8 customized configurations
Refer to the “Printing a Configuration” section on page 3–16 for details.
Delete Configuration
You can delete one or all of your eight customized configurations. Configuration 0
is a factory-preset configuration and cannot be changed or deleted.
Power-up Configuration
You can specify one of nine (0 – 8) configurations to be used upon printer
power-up. The factory default for power-up is configuration 0.
Protect Configuration
You can specify whether or not a new configuration should overwrite an existing
configuration when you activate the SAVE CONFIG option. When disabled
(default), the new configuration will overwrite the existing configuration. When
enabled, the new configuration will
not
overwrite the existing configuration, and
the following will be displayed:
CFG FILE EXISTS
DELETE FIRST
Therefore, you must delete an existing configuration before trying to save a new
configuration.