Filter
Top Products
Psion Teklogix netpad Win CE 4.1 User Manual 81
Chapter 7: Configuring Communications
Setting Up E-mail On netpad
Some service providers require additional information to ‘log on’ to their server.
You may need the following information when using some service providers.
7.4.3 Setting Up E-mail On netpad
If you have collected all the information in the checklist, you are now ready to set up
your netpad to connect to your ISP.
7.4.3.1 Connecting The Modem
1. Connect your netpad to the modem using the netpad’s serial cable.
What Do I Need To Do This?
To connect your netpad serial cable to your modem you may require a Psion
Teklogix modem cable adaptor. You can only use a Psion Teklogix adaptor,
which can be obtained from your local distributor.
2. Connect your modem to the telephone socket and switch on
the modem.
Optional Information Where To Find It Write It Here
IP Address (if your ISP’s
server doesn’t provide one
automatically).
From your ISP/administrator
e.g. “194.129.243.153”.
DNS Addresses (primary and
secondary DNS addresses if
your ISP’s server doesn’t
provide them automatically).
From your ISP/administrator
e.g. “123.255.78.90” and
“123.255.78.92”.
Mailbox Login (if different
from your Internet account
user name).
From your ISP/administrator.
Mailbox Password (if differ-
ent from your Internet account
password).
From your ISP/administrator,
or you may have chosen this
yourself.
Table 7.2 ISP Additional Information