Filter
Top Products
Psion Teklogix netpad Win CE 4.1 User Manual 79
Chapter 7: Configuring Communications
Setting Up Your netpad
2. A modem.
You will need a modem to connect your netpad to the telephone net-
work. You can use the following types of modem with your netpad:
• Standard external PC modems.
• Internal radio modem (GSM variant), see “GSM/GPRS Modem Config-
uration” on page 68 for details.
• Infrared-enabled mobile phones with built-in modems.
3. A telephone connection.
If you are using a standard external modem, you will need to connect
your modem to a telephone socket. If you are using a mobile phone,
your network operator will need to enable your SIM (Subscriber Iden-
tity Module) card so that you can make fax and data calls on your
phone. If your phone has been enabled for fax and data calls, you
should have two extra phone numbers. Contact your network operator
if you are unsure whether your phone's SIM card is ‘data-enabled’.
7.4.2.2 Getting Help
If you are having connection problems, you can find information about connecting
using specific service providers, modems or mobile phones on our web site at
www.psion.com/mobile.
7.4.2.3 What Information Do I Need?
Before you can set up your netpad, you will need to find out some information about
your modem and your Internet e-mail account by:
• Checking any documentation your ISP supplied about your Internet
account, or contacting your network administrator at work.
• Checking your ISP’s web site for technical support.
• Contacting your ISP by e-mail or phone for technical support.
• Checking the Psion Teklogix web site at www.psion.com/mobile for
details of worldwide ISPs and to use the ISP configuration wizard.