Filter
Top Products
Chapter 2: Getting Started
How To Reset The netpad
22
Psion Teklogix netpad Win CE 4.1 User Manual
To perform a soft reset:
gently press the stylus onto the reset button. This is located inside the card slot
door cover to the side of the MMC slot.
Figure 2.12 Reset Button Location
Press the On/Off button to restart the netpad—you will hear two beeps during boot-
up to indicate the reset. After a soft reset, any changes to open files will be lost. Your
other files on the internal disk will almost always be safe. It is possible (although
unlikely) that performing a soft reset after a program failure may cause the netpad to
lose the information on the internal disk; it could even prevent the reset from
working at all. If this happens, you will have to perform a “hard reset”.
Important: A hard reset resets the netpad completely, and all information on
the internal disk will be lost.
To perform a hard reset:
1. Remove the netpad from the docking station (if applicable).
2. Remove the main battery.
3. Press and hold down the On/Off button (on the top of the unit).
4. While continuing to hold down the On/Off button, press and release the
Reset button.
5. Release the On/Off button.
6. Refit the battery into the netpad—the unit will power up and you will hear
one beep during boot-up.
Note: Hard resetting the netpad will delete the partnership on the netpad. You
may delete and re-create the partnership on the PC, or create another
partnership with a new name. Refer to ActiveSync’s online help for more
details on this operation.
MMC
SIM Card
Reset Button