Filter
Top Products
2 – QLA4000/4000C
Specifications
2-4 IS0053301-00 D
Q
■ PCI connectors vary among system HBA manufacturers. The
QLA40xx HBA is a 64-bit PCI device that can function in a 32-bit PCI
slot; the slot conforms to the PCI specification (the rear edge of the
PCI slot is notched). If you try to install the QLA40xx HBA into a PCI
slot that does not conform to the PCI specification, you may damage
the QLA40xx HBA.
■ PCI and PCI-X slots look the same. If the PC contains both PCI and
PCI-X slots, refer to the PC manufacturer’s instructions to determine
the slot type.
■ The QLA40xx HBAs are designed and tested to operate at PCI bus
speeds of up to 66 MHz.
5. Remove the slot cover for the slot in which you will install the QLA40xx HBA.
6. Place the QLA40xx HBA into the slot. Carefully press the HBA into the slot until
it seats firmly.
7. Secure the QLA40xx HBA to the chassis. Follow the PC manufacturer’s
instructions.
8. Connect the appropriate cable from the devices to the corresponding connector.
9. Carefully reinstall the computer cover. Insert and tighten the computer cover
screws.
10. Power up the PC.
See the appropriate section for detailed instructions on how to install the software
drivers. See section 7 for detailed instruction on how to install the SANblade Control
iX GUI.
2.3
Specifications
Tables 2-1 and 2-2 define the QLA40xx HBA specifications.
Table 2-1. QLA40xx HBA Operating Environment
Environment Minimum Maximum
Operating temperature 0°C/32°F 55°C/131°F
Storage temperature –20°C/–4°F 70°C/158°F
Relative humidity (noncondensing) 10% 90%
Storage humidity (noncondensing) 5% 95%