Filter
Top Products
SANblade 4000 Series User’s Guide
1-Gb iSCSI to PCI Host Bus Adapters
Q
Page ii IS0053301-00 D
Information furnished in this manual is believed to be accurate and reliable. However, QLogic Corporation assumes no
responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
QLogic Corporation reserves the right to change product specifications at any time without notice. Applications described
in this document for any of these products are for illustrative purposes only. QLogic Corporation makes no representation
nor warranty that such applications are suitable for the specified use without further testing or modification. QLogic
Corporation assumes no responsibility for any errors that may appear in this document.
No part of this document may be copied nor reproduced by any means, nor translated nor transmitted to any magnetic
medium without the express written consent of QLogic Corporation.
Microsoft, Windows NT, and Windows 2000 are trademarks of Microsoft Corporation.
QLogic is a trademark of QLogic Corporation.
Red Hat Linux is a registered trademark of Red Hat Corporation
All other brand and product names are trademarks or registered trademarks of their respective owners.
Document Revision History
Rev. A release, 4/30/02
Rev B update 8/20/02
Rev. C update, 11/8/02
Rev. D update, 1/30/03
Changes Document Sections Affected
QLA4000/4000C now supports draft 0.20 of iSCSI standard (was draft 0.8). 1.2
Changed operating power from 15 watts to 25 watts. 2.3
Added QLPSEDUO.INF file to list of files provided for the Windows 2000 driver. 3.2
Added support for Red Hat Linux 8.0 5
Corrected code in step 3 5.3.1
Removed the following line from step 12:
/kernel/drv/qla4000.conf
6.2
Corrected package name to QLA4000-0 6.2
Removed Solaris 9 from instructions 6.2
Removed Fibre Channel in references to tape devices 6.2, 6.4
Title change to clarify section content 6.3, 6.4
Clarified instructions for accessing sd.conf and st.conf files by opening them with
an editor instead of only accessing their location.
6.3, 6.4
Added more information about uninstalling the Solaris driver 6.5
© 2002–2003 QLogic Corporation. All rights reserved worldwide.
First Printed: February 2002
Printed in U.S.A.
QLogic Corporation, 26600 Aliso Viejo Parkway, Aliso Viejo, CA 92656, (800) 662-4471 or (949) 389-600
0