Filter
Top Products
7 – SANblade Control iX
Configuring the QLA40xx HBA
7-16 IS0053301-00 D
Q
Figure 7-15. HBA Tabbed Page (Network)
Entering the following information in the HBA Options tabbed page is optional:
■ Gateway information
■ iSCSI alias (the default is none)
■ iSCSI name (the default is per the iSCSI standard, you can change it).
■ Firmware configuration settings:
❑ From the Select Options drop down box, click Firmware.
❑ Click View. This dialog box allows you to see various firmware configuration
values, iSCSI parameters, timeouts, etc. If you want to change the firmware
parameters, click Edit. For more information, see section 7.7.
■ Upgrade the firmware (see section 7.9).
After inputting your desired configuration, click Save.
NOTE: When entering information for the IP address, gateway, and subnet mask,
press the TAB key to move to the next field.