Filter
Top Products
3 – Windows 2000 Driver Installation
Installing the Driver
IS0053301-00 D 3-3
Q
3.4.2
Adding the QLA40xx HBA to the Existing OS
Perform the following steps to add the QL4000.SYS driver to an existing
Windows 2000 system:
1. Install the QLA40xx HBA in the appropriate slot on your computer (see
section 2.2).
2. Restart or power up your computer.
3. When your computer powers up, Windows 2000 detects the newly installed
device, then displays the Found New Hardware with SCSI Host Bus Adapter
message. The Found New Hardware Wizard program is launched to begin
installing the QL4000.SYS driver for the QLA40xx HBA.
4. Click Next.
5. Select Search for a suitable driver for my device (recommended). Click
Next.
6. Select specify a location. Click Next.
7. Insert the driver disk created in section 3.3 in an appropriate drive.
8. In the Install From Disk dialog box, type the path to the QLogic driver directory
and click OK. For example:
A:\W2k
9. Click Next.
10. In the Start Device Driver Installation dialog box, click Next.
11. When the Digital Signature Not Found dialog box displays, click Yes.
12. In the Upgrade Device Driver Wizard/Completing the Upgrade Device
Driver Wizard dialog box, click Finish.
13. The following message displays:
Your hardware settings have changed. You must restart your
computer for these changes to take effect.
Do you want to restart your computer now?
Click Yes.