Filter
Top Products
2 – QLA4000/4000C
Agency Certification
IS0053301-00 D 2-5
Q
2.4
Label
The transceiver on the QLA4000 HBA is a Class I laser product. It complies with
IEC 825-1 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be
operated under recommended operating conditions.
2.5
Agency Certification
The following sections contain a summary of the EMC/EMI test specifications
performed on the QLA4000/4000C (IS0110404) to comply with radiated emission,
radiated immunity and product safety standards.
2.5.1
EMI and EMC Requirements
The QLA4000/4000C conforms to the following requirements:
■ FCC Part 15, Class B
❑ Radiated EmissionClass B
❑ Conducted EmissionClass B
■ ICES-003 Class B
■ CE Mark 89/336/EEC EMC Directive
Table 2-2. QLA40xx HBA Specifications
Type Specifications
Universal PCI specifications PCI Local Bus Specification, revision 2.2
32/64-bit, 33/66 MHz
3.3-V and 5-V buses supported (± five percent)
Standards IP v.4
SCSI Architecture Model (SAM-2)
SCSI-3 Command Set
Connectors Optical mutimode cable with an LC-style duplex connector
(QLA4000 HBA)
Cat5e or Cat6 straight-through cable (not cross-over
cable) with an RJ45 connector (QLA4000C HBA)
Form factor PCI full card: 16.93 cm×5.15 cm (6.7"×2.5")
Operating power 25 watts
CLASS I LASER PRODUCT