Q-Logic 59042-07 A Switch User Manual


 
B – Command Line Interface
Show Command
B-58 59042-07 A
0
Show Command
Displays fabric, switch, and port operational information.
Authority None
Syntax show
about
alarm [option]
broadcast
chassis
config [option]
domains
donor
fabric
fdmi [port_wwn]
interface
log [option]
lsdb
mem [count]
ns [option]
pagebreak
perf [option]
port [port_number]
post log
setup [option]
steering [domain_id]
support
switch
topology
users
version
Keywords about
Displays an introductory set of information about operational attributes of the
switch. This keyword is equivalent to the Version keyword.
alarm [option]
Displays the alarm log and session display setting. If you omit [option], the
command displays the last 200 alarm entries. The alarm log is cleared when the
switch is reset or power cycled. [option] has the following value:
setting
Displays the status of the parameter that controls the display of alarms in the
session output stream. This parameter is set using the Set Alarm command.
broadcast
Displays the broadcast tree information and all ports that are currently transmitting
and receiving broadcast frames.