Q-Logic 59042-07 A Switch User Manual


 
4 – Installation
Installing a Switch
59042-07 A 4-9
0
For a Linux workstation:
1. If a file browser does not open, double-click the CD-ROM icon to open the
browser. Double click the Switch_Manager folder, then double click the
Linux folder. If there is no CD-ROM icon, do the following:
a. Open an xterm or other terminal window.
b. Mount the CD-ROM. From a shell prompt, enter the following
command:
mount /mnt/cdrom
c. Change directory to location of the install program:
cd /mnt/cdrom/Switch_Manager/Linux
2. Enter the following command to make the install file executable:
chmod +x Linux_4.02.xx_xxxx.bin
3. Execute the install program and follow the installation instructions:
./Linux_4.02.xx_xxxx.bin
For a Solaris workstation:
1. Open a terminal window. If the disk isn’t already mounted, enter the
following command:
volcheck
2. Move to the directory on the disk that contains the executable. Enter the
following command:
cd cdrom/cdrom0/Switch_Manager/solaris
3. Add the package and follow the SANsurfer Switch Manager installation
instructions. Enter the following command:
pkgadd -d sol_pkg