Filter
Top Products
59042-07 A Page v
SANbox2-8c Fibre Channel Switch
Installation Guide
0
3.6 Fabric Management ......................................................................................... 3-12
Section 4 Installation
4.1 Site Requirements.............................................................................................. 4-1
4.1.1 Fabric Management Workstation............................................................... 4-1
4.1.2 Switch Power Requirements ..................................................................... 4-1
4.1.3 Environmental Conditions.......................................................................... 4-2
4.2 Installing a Switch............................................................................................... 4-2
4.2.1 Mount the Switch....................................................................................... 4-3
4.2.2 Install SFP Transceivers............................................................................ 4-4
4.2.3 Connect the Workstation to the Switch...................................................... 4-5
4.2.4 Configure the Workstation ......................................................................... 4-6
4.2.4.1 Setting the Workstation IP Address for Ethernet Connections ......... 4-6
4.2.4.2 Configuring the Workstation Serial Port............................................ 4-6
4.2.5 Install the Management Application........................................................... 4-8
4.2.5.1 SANsurfer Switch Manager .............................................................. 4-8
4.2.5.2 SANsurfer Management Suite........................................................ 4-10
4.2.6 Start SANsurfer Switch Manager............................................................. 4-16
4.2.7 Connect the Switch to AC Power ............................................................ 4-17
4.2.8 Configure the Switch ............................................................................... 4-19
4.2.9 Cable Devices to the Switch.................................................................... 4-21
4.3 Install Firmware................................................................................................ 4-21
4.3.1 Using SANsurfer Switch Manager to Install Firmware............................. 4-22
4.3.2 Using the CLI to Install Firmware ............................................................ 4-22
4.4 Powering Down a Switch.................................................................................. 4-23
Section 5 Diagnostics/Troubleshooting
5.1 POST Diagnostics.............................................................................................. 5-1
5.1.1 Heartbeat LED Blink Patterns.................................................................... 5-2
5.1.1.1 Internal Firmware Failure Blink Pattern ............................................ 5-2
5.1.1.2 System Error Blink Pattern ............................................................... 5-2
5.1.1.3 Configuration File System Error Blink Pattern .................................. 5-3
5.1.2 Logged-In LED Indications ........................................................................ 5-5
5.1.2.1 E_Port Isolation ................................................................................ 5-6
5.1.2.2 Excessive Port Errors ....................................................................... 5-7
5.2 Chassis Diagnostics........................................................................................... 5-9
5.2.1 Over Temperature LED is Illuminated........................................................ 5-9
5.2.2 Input Power LED Is Extinguished............................................................ 5-10
5.2.3 Fan Fail LED is Illuminated...................................................................... 5-10
5.3 Recovering a Switch......................................................................................... 5-11