Filter
Top Products
B – Command Line Interface
Show Config Command
B-66 59021-08 B
D
Show Config Command
Displays switch, port, alarm threshold, and zoning for the current configuration.
Authority None
Syntax show config
port [port_number]
switch
threshold
zoning
Keywords port [port_number]
Displays configuration parameters for the port number given by [port_number].
Ports are numbered beginning with 0. If [port_number] is omitted, all ports are
specified.
switch
Displays configuration parameters for the switch.
threshold
Displays alarm threshold parameters for the switch.
zoning
Displays zoning configuration parameters for the switch.
Examples The following is an example of the Show Config Port command:
SANbox2 #> show config port 3
Port Number: 3
------------
AdminState Offline
LinkSpeed Auto
PortType GL
SymbolicName Port3
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
ExtCredit 0
FANEnabled True
LCFEnabled False
MFSEnabled True
MSEnabled True
NoClose False
IOStreamGuard Disabled
VIEnabled False
PDISCPingEnable True