5 – Diagnostics/Troubleshooting
POST Diagnostics
59021-08 B 5-5
D
e. Establish communications with the switch using Telnet. Enter one of
the following on the command line:
telnet xxx.xxx.xxx.xxx
or
telnet switchname
where xxx.xxx.xxx.xxx is the switch IP address and switchname is the
switch name associated with the IP address.
f. A Telnet window opens prompting you for a login. Enter an account
name and password. The default account name and password are
(admin, password).
g. Open an admin session to acquire the necessary authority.
SANbox2 $>admin start
h. Restore the configuration file. When the restore is complete, the switch
will reset.
SANbox2 (admin) $>config restore