Filter
Top Products
What to do If Something Goes Wrong
88
3
Duplex
Problem Cause Action
Order of copies is not
correct.
You set originals in the incor-
rect order.
When setting a stack of origi-
nals in the document feeder,
the last page should be on the
bottom.
If you set an original on the
exposure glass, start with the
first page to be copied.
In Margin Adjust-
ment mode, parts of
the original image are
not copied.
The margin is too wide. Set a narrower margin with
the user tools. See “03. Left
Dup. Margin” in
⇒
P.121
“2.
Adjust Image 1/3”
. See “04. Top
Dup. Margin” in
⇒
P.121
“2.
Adjust Image 1/3”
.
Orientation of copies
(Top to Top, or Top to
Bottom) is not correct.
You set originals in an incor-
rect direction or the orienta-
tion setting is incorrect.
Select the correct orientation,
or set originals correctly.
⇒
P.64
“Duplex—Making Two-
Sided Copies”
Note
❒
If you set A3, 11"
×
17" or
B4JIS, 8
1
/
2
"
×
14" originals
as shown below, for exam-
ple, take one of the two ac-
tions described below the
illustration.
❒
Select [
Top to Bottom
] to
make copies in “Top to
Top” orientation. Select
[
Top to Top
] to make copies
in “Top to Bottom” orien-
tation.
❒
Alternate the originals as
shown below when setting
them.