Filter
Top Products
83
3. What to do If Something
Goes Wrong
If Your Machine does not Operate as You
Want
Message
Machine's Condition Problem/Cause Action
The machine instructs
you to wait.
The machine is warming up. Wait for the machine to
warm-up.
Reference
You can use Auto Start
mode during the warm-up
period. See
⇒
P.48
“Auto
Start—Entering Copy Job
Settings During the Warm-
up Period”
The machine cannot
detect the original
size.
Unsuitable original is set. See
⇒
P.17
“Sizes Difficult to De-
tect”
.
Set non-standard size original
on the exposure glass.
Input the both horizontal and
vertical sizes of the non-stan-
dard original. See
⇒
P.27
“Set-
ting Originals on the Exposure
Glass”
.
Select paper manually, not in
Auto Paper Select mode.
Do not use Auto Reduce/En-
large mode.
Original is not set. Set your originals.
The machine instructs
you to check the origi-
nal direction.
There is no copy paper that is
the same direction as the orig-
inals.
Set the original in the same di-
rection as the copy paper.
The machine instructs
you to check paper
size.
Unsuitable original size is set. Select the proper paper size.
The machine cannot
staple this size paper.
-- Select the proper paper size
that can be used in Staple
mode. See
⇒
P.38
“Staple”