Filter
Top Products
Combine—Combining Originals into One Copy
59
2
❖
8 Orig.
Copies eight 1-sided originals to-
gether onto one side of copy paper.
❖
8 Orig. (optional duplex unit is re-
quired.)
8 one-sided pages are copied onto
1 two-sided sheet, 4 original imag-
es on each side.
❖
16 Orig. (optional duplex unit is
required.)
16 one-sided pages are copied onto
1 two-sided sheet, 8 original imag-
es on each side.
Original direction (when set in docu-
ment feeder)
• Originals reading from left to right
• Originals reading from top to bot-
tom
Limitation
❒
You cannot use the bypass tray
with this function.
❒
The machine cannot copy originals
different in size and direction.
Note
❒
The number of originals copied
(combined) can be 2, 4, 8, or 16.
❒
In this mode, the machine selects
the reproduction ratio automati-
cally. This reproduction ratio de-
pends on the copy paper sizes and
the number of originals.
❒
You can change the reproduction
ratio from 25–400 %.
❒
When you set the originals in the
document feeder, you can change
the reproduction ratio from 50–200
%.
❒
If the calculated ratio is under the
minimum ratio, it is corrected
within the range of the ratio auto-
matically. However, with some ra-
tios, parts of the image might not
be copied or blank margins appear
on copies.
❒
A separation line between origi-
nals can be printed with the user
tools. See “06. Line(Combine)” in
⇒
P.122
“2. Adjust Image 2/3”
.
❒
Even if the direction of originals is
different from that of the copy pa-
per, the machine will automatical-
ly rotate the image by 90
°
to make
copies properly. (When the Auto
Reduce/Enlarge function is select-
ed)
❒
You can make copies even if the
number of originals is less than the
number required in the selected
mode. You can also disable this
function with the user tools. See “2.
Comb. Auto Eject ” in
⇒
P.124
“3.
Input/Output 1/2”
.
Combine5
3
4
1
2
4
3
2
1
Combine6
3
4
1
2
4
3
2
1