Filter
Top Products
If You Cannot Make Copies as You Want
87
3
Combine
Stamp
Problem Cause Action
Parts of the image are
not copied.
You specified an improper re-
production ratio that does not
meet the sizes of your origi-
nals and copy paper.
When you specify a reproduc-
tion ratio using Manual Paper
Select mode, make sure the ra-
tio matches your originals and
the copy paper.
Note
❒
Select the correct repro-
duction ratio before using
Combine mode.
Your originals are not identi-
cal in size and direction.
Use originals that are identical
in size and direction.
Order of copies is not
correct.
You set originals in the incor-
rect order.
When setting a stack of origi-
nal in the document feeder,
the last page should be on the
bottom.
If you set an original on the
exposure glass, start with the
first page to be copied.
Problem Cause Action
Stamps do not appear
on copies.
The original is not set correct-
ly.
Set original correctly.
See
⇒
P.75
“Preset Stamp—
Printing Preset Messages on
Your Copies”
.
Original image and
stamp overlap on cop-
ies and original image
cannot be read.
The stamp is set to solid. Change to screen. See
⇒
P.127
“4 Stamp Setting 3/3”
.
Your original has narrow
margins on four sides.
Change the stamp position.
See
⇒
P.127
“4 Stamp Setting
3/3”
.
Page numbers do not
appear in the position
you require.
The numbering position is
wrong.
Change the numbering posi-
tion.
See
⇒
P.126
“4 Stamp Setting
2/3”
.