Filter
Top Products
Basics
14
1
Note
❒
If the power is not turned on
when the operation switch is
pressed, check if the main pow-
er switch is on. If off, turn it on.
❒
During the warm-up period,
you can use the Auto Start func-
tion. See
⇒
P.48
“Auto Start—
Entering Copy Job Settings Dur-
ing the Warm-up Period”
.
❒
Warm-up period is 45 seconds.
When the machine is set for user codes
A Enter your user code using the
Number keys. Then press the
{
#
}
key.
Note
❒
To prevent others from making
copies with your user code,
press the
{
Clear Modes
}
key and
the
{
Clear/Stop
}
key simulta-
neously after copying.
Reference
For how to set user codes, see
⇒
P.119
“1. General Features 4/4”
.
When the
{
Energy Saver
}
indicator is lit
The machine is in Energy Saver
mode.
A Press the
{
Energy Saver
}
key.
The machine will return to the
ready condition.
Note
❒
The machine will also return to
the ready condition when an
original is set in the document
feeder, or when the platen cover
or document feeder is opened.
Reference
See “06. Panel Off Timer” in the
System Settings Reference.
Turning off the Power
Important
❒
If you wish to unplug the power
cord or turn off the main power
switch, make sure that the remain-
ing memory space indicates 100%
on the display for fax mode.
❒
Fax files stored in memory will be
lost an hour after you turn the
main power switch off or you un-
plug the power cord. See “Turning
off the Power” in the Fax Refer-
ence.
A Press the operation switch to
make the On indicator go off.