Filter
Top Products
Setting Originals
27
2
Setting Originals
Note
❒
Basically the originals should be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the direction of the
originals. For details, see explana-
tions of each function.
Reference
See
⇒
P.16
“Originals”
.
Setting Originals on the
Exposure Glass
A Lift the platen cover or the docu-
ment feeder.
Note
❒
Be sure to open the platen cover
or the document feeder by more
than 30
°
, otherwise the original
size might not be detected cor-
rectly.
B Set the original face down on the
exposure glass. The original
should be aligned to the rear left
corner.
1: Reference mark
2: Scale
C Lower the platen cover or the doc-
ument feeder.
Setting Originals in the
Document Feeder
Note
❒
The original might become dirty if
it is written with a pencil or similar
tools.
❒
You cannot set a multi-page origi-
nal with pages of different sizes in
the document feeder. If your origi-
nal contains pages of different siz-
es, use the SADF function and set
each page one at a time. Alterna-
tively, set pages one at a time on
the exposure glass.
❒
Do not place any foreign objects on
the document feeder or cover it
with your hand. This could cause
the size not to be detected proper-
ly.
Originals Set in the
document
feeder
Set on the
exposure
glass