Filter
Top Products
Faxing
12
2
C
Carefully insert the document
stack face down into the Auto-
matic Document Feeder. At this
time, the Panel display should
change to “
DIAL FAX NUMBER
”.
Important
❒ Gently insert the documents,
until you feel them catch on the
rollers inside the Automatic
Document Feeder.
Note
❒ Make sure this message ap-
pears. If it does not, your docu-
ment will not be scanned from
the Automatic Document Feed-
er.
❒ You can dial before you set the
document. Place the document
after you dial the number and
go to step G.
D
The display will look like this:
TRANSMIT OPTIONi
DIAL FAX NUMBER
E
If the memory indicator is not lit,
press the {
{{
{Memory}
}}
} key.
F
Dial the number in one of the fol-
lowing ways.
TRANSMIT Y/START
5551234kkkkkkkkkkkkk
*1
In this example Group Dial is pro-
grammed in Quick Dial 08.
*2
In this example Quick Dial key 10
is programmed as the Group key,
and Group dial number 1 is pro-
grammed.
Note
❒ If you want to erase a digit of
the phone number, press the
{Clear} key. If you want to erase
the entire number, press the
{No} key.
❒ The maximum destinations you
can dial using the ten key pad is
49. However, this limitation is
also subject to memory capaci-
ty.
Ten Key Pad Quick Dial
Speed Dial Group
Example:
Method
*1
Quick
Dial key 08.
Method
*2
Quick
Dial key 10 and 1
on the ten key pad.
1 2 3
4 5 6
7 9
*
GFDIAL0N
07
06
GFDIAL1N
Speed Dial
1
0
Example: Speed Dial 10
GFDIAL2N
Holsten1AE_Basic_FM.book Page 12 Monday, November 6, 2000 8:10 PM