Ricoh FAX1400L Fax Machine User Manual


 
Troubleshooting
48
4
Transmission cannot take place;
CLEAR ORIGINAL
appears.
The document is jammed in the Automatic Document Feed-
er.
Remove the jammed document. See P.38 Clearing a Docu-
ment Jam
The document may be longer than the maximum limit (see
Chapter 11, Document and Paper Specificationsin the Ad-
vanced Features manual).
Make sure that none of your originals exceed this limit.
Do user maintenance, especially rollers (1). See Chapter 9,
Cleaning the Rollers and Scanner" in the Advanced Fea-
tures manual.
Transmission cannot take place.
Before taking action, wait until
the machine is in standby mode,
and then press the {Stop} key.
The other machine is out of order.
Check the error report.
Ask the other party to check their machine and correct the
fault.
The line is noisy.
Check that the dial tone is sent out.
Try to retransmit.
Consistent difficulty in commu-
nicating with a particular termi-
nal
There are some bad lines between you and that other termi-
nal.
Store that terminal's number as a Quick Dial Key or Speed
Dial Code.
Then call a service technician. Inform the nature of the prob-
lem and give the Quick Dial Key or Speed Dial Code that
you stored the number in.
Consistent poor image quality
when communicating with a
particular terminal
RECEPTION
The telephone keeps ringing and
no fax is printed.
You might be in TEL mode.
Change to Auto or FAX mode. See P.18 Reception Modes.
Power is switched off.
Switch the power on.
RECEPTION/COPYING
No printout; the Check Disp. in-
dicator is lit.
ADD PAPER
ap-
pears.
The Paper Tray are empty.
Add Paper . See P.33 Loading Paper into the Paper Tray.
No printout;
CLEAR COPY
ap-
pears.
The printer has jammed.
Clear the jam. See P.39 Clearing a Copy, Fax, or Print Jam.
Copies are blank. The original might be placed face up in the Automatic Doc-
ument Feeder.
Position the original correctly. See P.11 Memory Transmis-
sion.
Problem Required Action
Holsten1AE_Basic_FM.book Page 48 Monday, November 6, 2000 8:10 PM