Filter
Top Products
Error Messages
43
4
Error Messages
The following messages may appear while you are operating or programming
the machine.
NO FILE EXISTS
No polling reception operations have been
programmed.
There are no messages in memory waiting for
transmission.
Incorrect file number. Check the file number
and try again.
TOO MANY DEST.
The memory cannot hold any more telephone
numbers. Either:
• Delete some numbers, and try again.
• Wait until some of the Send Later or other
delayed transmissions waiting in memory
have been carried out, and try again.
USED AS GROUP DIAL
This Quick Dial Key has a Group stored in it.
USED AS DIAL
This Quick Dial Key has a telephone number
stored in it.
USED AS GROUP KEY
This Quick Dial Key is programmed as Group
Key.
USED AS DIAL OPTION
Dial Option feature is set in Quick 09.
NOT PROGRAMMED
Either:
• This Quick Dial Key or Speed Dial Code
does not contain a number.
• This Quick Dial Key does not contain a
Keystroke Program.
ALREADY PROGRAMMED
This number is already included in this Group.
ADD TONER
The toner cartridge is empty. Install a new car-
tridge.
ADD PAPER
The Paper Tray is empty. Load the paper.
CLEAR ORIGINAL
A document is jammed in the Automatic Doc-
ument Feeder.
A document is stopped while the document is
being scanned in.
CLEAR COPY
Paper is jammed in the printer.
CLOSE COVER
A cover is not closed properly. Check that
Front Unit is closed.
UNABLE USE PRINTER
Machine cannot print a list/file, because the
heater is not warm enough or printer is not
ready, the machine is receiving a fax message
or reports are printed automatically.
Holsten1AE_Basic_FM.book Page 43 Monday, November 6, 2000 8:10 PM