Filter
Top Products
Replacing the Photoconductor
The photoconductor receives the print image before it is transferred to paper.
To ensure optimal quality, replace it every 20,000 copies.
If the following display appears, it is time to replace the photoconductor.
To check how many sheets you’ve printed, please refer the section titled
"Counters" (See page 37.)
Caution: Do not expose the photoconductor drum to light for an extended
period.
Caution: Do not open the cover or touch the PC drum : it cannot be re-
paired. Any scratch on the drum would be reproduced on prints.
Caution: Do not touch any parts other than those specified in the proce-
dure.
Caution: Though organic photoconductor drums are safe for the environ-
ment, dispose of used drums according to local regulations.
1
Squeeze in the release button on
the left of the machine and open
the cover fully back.
2
Lift out the toner cassette.
3
Remove the old photoconductor.
Replacing the Photoconductor MAINTAINING YOUR MACHINE
51