Filter
Top Products
Installing the Photoconductor and Toner Cassette
❐ First of all, remove all the pieces of tape attached with the machine.
Before using the machine, install the photoconductor and toner cassette as
follows:
1
Squeeze in the release button on
the left of the machine and open
the cover fully back.
2
Put in the photoconductor as
shown. The left and right ends
are marked "L" and "R" respec-
tively.
3
Shake the toner cassette from
side to side before installing it.
Put in the toner cassette. Make
sure it sinks right down.
The right end is marked "2".
4
Close the cover firmly.
INSTALLATION Installing the Photoconductor and Toner Cassette
78