Filter
Top Products
Document & Paper Specifications
Documents (Using the Auto Document Feeder)
Length : 105~600mm
Width: 148~216mm
Thickness : 0.05 ~0.2mm (50 to 90 g/m
2
)
Document Feeder Requirements
❐ Do not insert torn, heavily curled, wavy, creased, dog-eared, damp, or otherwise
damaged documents. Make copies of these originals and scan the copies.
❐ Do not insert folded, stapled, clipped, glued, or taped documents, or documents
with a metallic coating. Make copies of these originals and scan the copies.
❐ Do not insert documents on which there is undried ink or correction fluid. Wait for
the document to dry.
❐ If the document has an uneven or slanted edge, do not insert that edge in first.
Paper Requirements
❐ Acceptable sizes are letter, legal, A4 and F4.
When a received fax message is printed, a margin of 4mm on all four sides is left
blank. To avoid loss of information, the sender should make sure their message
does not run over these margins.
❐ Do not print to torn, heavily curled, wavy, creased, dog-eared, damp, or
otherwise damaged paper.
❐ Do not print to folded, stapled, clipped, glued, or taped paper.
❐ Do not print to paper with any kind of coating or printing. Do not print to metallic
paper. Do not print to the reverse side of a print.
TECHNICAL REFERENCE Document & Paper Specifications
72