Filter
Top Products
3
To change bit 3, press 3 on the
key pad. Bit 3 will change from 1
to 0 or from 0 to 1.
(To change bit 0, press 0, to
change bit 1, press 1, and so on.)
4
Press Yes and Function.
Here is a list of all relevant user parameters. Many bit settings have no effect
and are not listed. (Never change these). The settings made at the factory are
underlined.
SW Digits & Definition Settings
00 0, 1, 2 and 3 Do not change these settings
4, 5: Default resolution when you
send a message
Bit 4 5
Standard 0 0
Detail 1 0
Fine 0 1
Halftone 1 1
6: Default setting for transmission
Memory: 0
Immediate: 1
01 7: Clear modes after sending a fax.
Off: 0
On: 1
User Parameters (function 63) TECHNICAL REFERENCE
65