Filter
Top Products
SW Digits & Definition Settings
08 2, 3:
(Can also use function 62)
Bits
2 3 :
0 X: Off
1 0: Receive messages only from
senders whose RTI/CSIs are
programmed.
1 1: Receive messages only from
senders whose RTI/CSIs are
programmed.
10 7: Use dithering halftone (SPD) or
standard halftone (STD)?
STD: 0
SPD: 1
12 2: Faxing & Report Toner Saving
Off: 0 On: 1
Note:
If on, contrast will be set to "Normal" automatically, preserving image quality.
This is available when receiving fax messages and printing reports, but not
for copying.
Further, messages sent to you in halftone mode will automatically turn off
toner saving to insure a clear image.
To make sure that the fax quality is acceptable with toner saving on, print a
few reports.
(Note: If the sender is using a machine made by another manufacturer, toner
saving will stay on and this could lower image quality.)
3, 4: Fax reception
density
Bit 3 4
Normal: 0 0
Darken: 0 1
Lighten: 1 0
13 Access to the public telephone line Bit 0 1
Loop Start 0 0
Ground Start 0 1
(This feature is not available in
France.)
Flash Start 1 1
PSTN 0 0
User Parameters (function 63) TECHNICAL REFERENCE
67