Filter
Top Products
5
Slide the draw until the paper just
touches the front and back of the
draw rightly.
Then press the button on the left
of the cassette to raise the metal
plate.
Make sure that the half-moon
shaped roller has its curved edge
on top.
6
Place the machine onto the paper
feed unit.
Warning: Watch your fingers!
Note: If any foreign matter (especially glue) is on the copy paper, print quality
may deteriorate. Make sure the front, back and sides of the copy paper are
completely clean.
Setting the Paper Size
Use the following procedure to select which paper size the machine will use for
the printouts. For example if you wish to use Legal size paper, install the Legal
size paper into the feed. After done that, choose "LEGAL" using Function 34 or
key.
1
Press the Function key and 3, 4,
using the ten keypad, then press
the Yes key.
Or
Press the key.
2
Current paper size appear in the
display. Scroll the paper size us-
ing the key then press Yes.
half-moon shaped roller
INSTALLATION Setting the Paper Size
82