Filter
Top Products
Operational Difficulties
Problem Required Action
STANDBY MODE
Nothing happens when the switch is
turned on.
Check the power cord. Is it properly plugged into
the outlet?
➣
Plug it in firmly
SET DOC. OR DIAL NO. is not
displayed.
Switch the power on.
➣
Check that the power cord is plugged in.
The machine might be in saving energy mode.
➣
Hold down any key for two seconds.
The display does not show the
Ready condition, or the machine
stops during operation.
Does CLEAR ORIGINAL or CLEAR COPY
appear in the display ?
➣
Clear the misfeed. See page 56.
Does ADD PAPER appear in the display?
➣
Load paper into the paper tray. See page 48.
Does CLOSE COVER appear in the display?
➣
Close all covers.
TRANSMISSION
The original is not pulled into the
auto document feeder.
You did not feed the document far enough into
the feeder.
➣
Insert the document into the feeder until it
stops. Retransmit.
Clean the ADF rollers (see page 54).
➣
If the same problem still exists after user
maintenance, contact your service
representative.
The machine cannot dial out. The telephone line is disconnected.
➣
Check that the line is connected properly.
The telephone line type setting is incorrect.
➣
Check the telephone line type setting
See page 84.
Troubleshooting Operational Difficulties
58