Ricoh AP2610 Printer User Manual


 
11
2. Installing Options
R
CAUTION:
Important
The voltage rating of the connector for options is 24V DC or less.
Turn the power off before removing the Paper Feed Unit Type 2600, 1-bin
Shift Sort Tray Type 2600, or Mailbox CS380. Removing any of these units
with the power on may cause the printer to fail.
Option List
Note
See the inside front cover of this manual to confirm which printer (Basic
model or Network standard model) you have.
: Available option
*1
With Basic model, these cannot be installed at the same time.
*2
With Network standard model, these cannot be attached at the same time.
Note
Up to two Paper Feed Units can be attached to the printer at the same time.
The installation of the Paper Feed Unit is necessary to attach the Envelope
Feeder Unit.
Be sure to turn off the printer and wait for about an hour before installing
options. Not waiting for the printer to cool down can result in a burn.
When lifting the printer, use the inset grips on both sides of the printer, oth-
erwise the printer might fall and cause personal injury.
When you move the printer, unplug the power cord from the wall outlet to
avoid a fire or an electric shock.
Basic model Printer Network standard
model Printer
Paper Feed Unit Type 2600 ❍❍
Envelope Feeder Type 2600 ❍❍
1-bin Shift Sort Tray Type 2600 ❍❍
CS380 (Mailbox) ❍❍
AD410 (Duplex Unit) ❍❍
Memory Unit TypeB 64MB ❍❍
Hard Disk Drive Type 2600 ❍❍
Network Interface Board Type 2610
*1
1394 Interface Unit Type 4510
*1
*2
❍❍
802.11b Interface Unit Type A
*1
*2
❍❍