Filter
Top Products
Installing Options
28
2
Connecting the 1394 Interface
Cable to the Printer
A
AA
A
Attach the 1394 interface cable to
the jack on the 1394 Interface
Unit.
Both types of jack are available.
B
BB
B
Connect the other end of the 1394
interface cable to the computer or
the other IEEE 1394 node.
Note
❒ After installing the last option that
you want, print the configuration
page to confirm the installation. If
the new device is listed in the col-
umn of configuration options, then
it has been properly installed. For
more information about printing
the configuration page, see "Print-
ing the Configuration Page" in the
Printer Reference on the CD-ROM
labeled "Operating Instructions".
-
--
-1394 Interface Unit
specifications
❖
❖❖
❖ Interface Connector:
IEEE 1394 (6 pins × 2)
❖
❖❖
❖ Required cable:
1394 interface cable (6 pins x 4
pins, 6 pins x 6 pins)
Important
❒ You cannot plug devices togeth-
er to create loops.
❒ Do not use a cable more than 4.5
meters (14.8 feet) long.
❖
❖❖
❖ Connectable number of devices in a
bus:
Maximum 63
❖
❖❖
❖ Allowed cable hops in a bus:
Maximum 16
❖
❖❖
❖ Power supply:
Nonpower supply
Cable Power repeated (IEEE
1394a-2000 compliant)
ZGDX550J