Roland SP-303 Network Card User Manual


 
24
Chapter 2. Using the Effects
Effects List
Effects That Can Be Selected Directly With the Effects Buttons
(*1) Time (Delay Time) is based on the tempo for the longest of the samples to which the effect is applied; the setting is made in
note units.
The types of notes that can be set:
thirty-second note (t32)
sixteenth note (t16)
dotted sixteenth note (t16.)
eighth-note triplets (t8.3)
eighth note (t8)
dotted eighth note (t8.)
quarter-note triplets (t4.3)
quarter note (t4)
dotted quarter note (t4.)
half-note triplets (t2.3)
half note (t2)
dotted half note (t2.)
whole note (t1)
However, you cannot select delay time settings exceeding approximately 1450 milliseconds.
In addition, playback of a pattern is based on the patterns tempo.
DSP EFFECTS CTRL 1
(display)
CTRL 2
(display)
CTRL 3
(display)
FILTER + DRIVE CUTOFF (CoF) RESONANCE (rES) DRIVE (drV)
Low-pass lter with overdrive.
Cuts the high frequencies and
adds distortion.
Adjusts the cutoff frequency. Adjusts the peak level at the cut-
off frequency.
Adds distortion.
PITCH PITCH (Pit) FEEDBACK (Fdb)
DIRECT/EFFECT BALANCE (dAL)
Modies the pitch. Changes the pitch up or down
two octaves.
Adjusts the feedback amount of
the pitch shift sound.
Adjusts the volume balance
between the effect sound and
the direct sound.
DELAY DELAY TIME (t32t1) FEEDBACK (Fdb) E.LEVEL (LEV)
Repeats the sound. Adjusts the time of the delayed
sound. (*1)
Adjust the number of times that
the delay will repeat.
Species the volume of the
delay.
VINYL SIM COMPRESSOR (CMP) NOISE LEVEL (noS) WOW FLUTTER (FLu)
Gives the sound the sonic quali-
ties of an analog record.
Adjusts the sense of compres-
sion in the sound that is charac-
teristic of analog records.
Adjusts the volume of analog
record noise.
Adjusts the rotational irregulari-
ties that occur when playing an
analog record.
ISOLATOR LOW (Lo) MID (Mid) HIGH (Hi)
Extracts and deletes sounds in the
low-, mid-, or high-frequency range.
Extracts/deletes sounds in the
low-frequency range.
Extracts/deletes sounds in the
midrange.
Extracts/deletes sounds in the
high-frequency range.