Filter
Top Products
58
Chapter 7. Using the SP-303 With Other MIDI Devices
Restoring the MIDI Settings
to the Factory Settings
To restore the MIDI settings, including the MIDI channel and
MIDI Sync mode settings, to the original factory settings, use
the following procedure.
1. Turn the power switch OFF.
2. Hold down [EXT SOURCE] and slide the POWER
switch to ON.
The MIDI settings are set as shown below.
MIDI Channel: 1
MIDI Sync Mode: Aut (Auto Sync)
Bank C Pad 1 Chinese Cymbal
Pad 2 Ride Cymbal (Bell)
Pad 3 Tambourine
Pad 4 Splash Cymbal
Pad 5 Cowbell
Pad 6 Crash Cymbal 2
Pad 7 Vibra-slap
Pad 8 Ride Cymbal 2
Bank D Pad 1 High Bongo
Pad 2 Low Bongo
Pad 3 Mute High Conga
Pad 4 Open High Conga
Pad 5 Low Conga
Pad 6 High Timbale
Pad 7 Low Timbale
Pad 8 Agogo
* Tone assignments for some rhythm machines may differ
from those listed above. In such cases, refer to the owner’s
manual for your rhythm machine and assign the tones
according to the rhythm machine’s tone assignments.