Filter
Top Products
24
Vista Remote 2 Installation and Operations Manual
KVM Switch Module Configuration
Connect to the unit directly from the local KVM station and logon. A computer must be
connected to CPU port #1 and powered on. Using the local keyboard, press and release the
left Ctrl key, then within 2 seconds press the F12 key. The press and release of the left Ctrl key
notifies the KVM Switch module that the next command issued within 2 seconds is a command
for the KVM Switch, not a connected computer. The F12 key will invoke the KVM switch
modules OSD main menu shown below.
The on-screen display (OSD) option is available for the all Vista Remote 2 models. You can
use the OSD to configure the switch module, select a computer from a list, display what
computer you are switched to and set up additional security options for the switches’
configuration and for computer access.
When entering information into the menu system, use only the numeric keys above the
keyboard, the numeric keys and <Enter> key on the keypad will not work.
Figure 17. KVM Switch Module OSD
Use the up / down arrow keys to select the item needed and press enter.
That selection menu will display for inputs