Filter
Top Products
Vista Remote 2 Installation and Operations Manual
31
Configure miscellaneous
This menu allows you to change the maximum computer ports and scan time.
Figure 23. Configure Misc
Maximum ports:
The “Maximum ports” configuration allows you to change the total number of computer ports
that are in use. If your using an 8-port switch and only connecting 6 CPUs, changing the
maximum ports from 8 to 6 will skip computer ports 7 and 8 during the scan function. To
change the “Maximum Ports”, highlight the maximum ports and press <Enter> to clear the field.
Type in the new value (1-8) and press <Enter>.
Scan time:
This item sets the pause time during the scan function.
To change the “Scan time”, highlight the scan time and press <Enter> to clear the field. Type in
the new value (1-16 seconds) and press <Enter>.