Filter
Top Products
Vista Remote 2 Installation and Operations Manual
25
Change the computer names
Selecting “Names” and pressing enter will display the below display.
Figure 18. Change computer names
Each computer is initially assigned a computer name, “computer x”,
where “x” = 1-8. To change the computer name to one of your choosing, use the up/down arrow
keys to select (highlight) the computers name to change. Once selected (highlighted), press
enter to clear the present name. Enter the new computer name (up to 16 valid ASCII
characters) and press <Enter>. The new name will be changed and saved immediately in non-
volatile memory.
The computer name is case sensitive. Use upper/lower case letters as
needed. (16 ASCII characters Maximum).
The “Reset to Initial Factory Settings” function will not change the assigned
computer names from their present values.