Open as PDF
Installing Printer Software in Windows
Installing Software for Network
When you connect your printer to a network, you must first
configure the TCP/IP settings for the printer. After you have
assigned and verified the TCP/IP settings, you are ready to
install the software on each computer on the network.
You can install the printer software using the typical or custom
This is recommended for most users. All components necessary
for printer operations will be installed.
Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer’s User’s Guide.
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
If the installation window does not appear, click
, replacing “
” with the
letter which represents your drive and click
If you use Windows Vista, click
, and type
window appears in Windows Vista, click
Install or run program
User Account Control
• If necessary, select a language from the drop-down list.
View User’s Guide
: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
Typical installation for a network printer
: If your printer is not connected to the network, the
following window will appear. Select a setup option you want,
Set IP Address
window appears. Do as follows:
1.Select a printer to be set with a specific IP address from the