Filter
Top Products
APPENDIX
A.10
Using Your Printer with a USB Cable
If you have a USB (Universal Serial Bus) port enabled on your computer, and if your
computer is running Windows 98, you can connect your ML-4600 printer to the USB
chain of devices.
Note: To connect the printer to the USB port of the computer requires a
certified USB cable. You will need to buy the USB 1.0 compliant cable.
To operate your printer with a Windows PC, you must install the
PCL 6 printer driver. Place the CD-ROM in the CD-ROM drive
and perform the instructions on page 2.8.
If you have a USB (Universal Serial Bus) port enabled on
your computer, and if your computer is running Windows 98,
you can connect your ML-4600 printer to the USB chain of
devices.
1
Make sure that both the printer and computer are turned
ON.
2
Plug one end of the USB cable into the USB port on the
printer.
2. Connect printer with
USB cable and
install USB driver
1. Install PCL 6 driver
Installing the Printer Software
To the USB port
on PC
➜