Filter
Top Products
SETTING UP YOUR PRINTER
2.14
4
The Copy to Floppy dialog box appears.
Select the desired components you want to copy to the
diskette from the Select box. You can select PCL 6 Printer
Driver, DOS RCP and USB Port Driver.
Select the floppy disk drive that you will be inserting the
diskette into.
5
Click Copy all disk images.
If you want to copy a portion of the selected component,
select the disk you want to copy in the Disk Images
window, and then click Copy selected disk image.
6
When prompted, insert a blank, formatted diskette into
the floppy drive, and click Yes to copy the first diskette.
For multiple diskettes, when the first diskette is finished,
you are prompted to insert disk 2.
Make sure you label each diskette in order as you create
it: ML-4600 PCL 6 driver, disk 1 of 2, etc.
Shows the path of
the selected
component.
Select the
component you
want to copy.
Shows the number
of disks required to
copy the selected
component.
Select the floppy
drive you will use.
Installing Software from Diskette