Filter
Top Products
SETTING UP YOUR PRINTER
2.8
Included with your printer is a CD-ROM containing the printer
driver for some of the most popular Windows software
applications. To operate your printer, you must install a printer
driver, which translates data from your application into data
that the printer understands.
If you are printing with a parallel interface
Go to page 2.9 for information on installing the print software
on a computer that is attached directly to the printer with a
parallel cable.
If you are printing with a USB interface
Go to “Using Your Printer with a USB Cable” on page A.10, for
information on installing the print software on a USB-enabled
computer.
If you are printing from Macintosh
Go to “Using Your Printer with a Macintosh” on page A.16, for
information on installing the print software and printing from
Macintosh.
If you are printing in DOS
Go to “Printing from DOS Application” on page A.23, for
information on installing the DOS RCP utility and printing from
DOS applications.
If you are printing in Linux
Go to “Linux Driver Installation” on page A.28, for information
on installing the Linux driver.
Install the Printer Software
Verify the following:
• At least 16 MB or more of RAM is installed on your PC.
• There is at least 50 MB of free disk space on your PC.
• All applications are closed on your PC before beginning
installation.
• Windows 95, Windows 98, Windows NT 4.0 or Windows 2000.
Before Installing the Printer Software