Filter
Top Products
SETTING UP YOUR PRINTER
2.6
1
Make sure that both the printer and the computer are turned off.
2
Plug the parallel printer cable into the
connector on the back of the printer.
Push the metal clips down to fit
inside the notches on the cable plug.
3
Connect the other end of the cable to
the parallel interface port on your
computer, and tighten the screws.
See your computer documentation if
you need help.
Connect to the Computer
with a Parallel Cable
If you are using a USB interface
Go to “Using Your Printer with a USB Cable” on
page A.10.
To the parallel
port on PC
➜