Filter
Top Products
Control panel overview
27
1. Introduction
4
Power
Turns the power on or off, or wakes up the machine from
the power save mode. If you need to turn the machine
off, press this button for more than three seconds.
5
Fax
Switches to Fax mode.
6
Copy
Switches to Copy mode.
7
Scan
Switches to Scan mode.
8
Menu
Opens Menu mode and scrolls through the available
menus (see "Menu overview" on page 33).
9 Left/
Right
Arrows
Scrolls through the options available in the selected
menu and increases or decreases values.
10 OK Confirms the selection on the screen.
11
Back
Sends you back to the upper menu level.
12
Start
Starts a job.
13
Stop/
Clear
Stops an operations at any time.
14
Status LED
Indicates the status of your machine (see
"Understanding the status LED" on page 99).
15
Numeric keypad
Dials a number or enters alphanumeric characters (see
"Keypad letters and numbers" on page 223).
16
On Hook
Dial
When you press this button, you can hear a dial tone.
Then enter a fax number. It is similar to making a call
using speaker phone (see "Receiving manually in Tel
mode" on page 261).
17
Redial/
Pause
Redials the recently sent fax number or received caller ID
in ready mode, or inserts a pause(-) into a fax number in
edit mode (see "Redialing the fax number" on page 254).
18 Address
Book
Allows you to store frequently used fax numbers or
search for stored fax numbers (see "Storing email
address" on page 221 or "Setting up the fax address
book" on page 224).
19
Display screen
Shows the current status and displays prompts during
an operation.
a. SCX-340xFW/ SCX-340xHW Series only.