Filter
Top Products
6.2
Inserting a pause
With some private telephone systems, you must dial an access code (9, for example) and listen for a second dial
tone before dialling an outside number. In such cases, you need to insert a pause in the number when you are
registering Auto Dial such as a One-Touch or Speed Dial number.
If you are asked for the number when setting up Auto Dial, follow this procedure:
Press
Redial/Pause
to insert a pause while entering the number.
• A ‘P’ is inserted at the point where you pressed
Redial/Pause
. If you need a longer pause, press
Redial/Pause
as
many times you want.
Using Recall (R or Flash)
The name of this button (
Recall
) differs depending on your country. The
Recall
button is equivalent to R or Flash.
If you do not have a special service that uses the switch-hook signal, do not press
Recall
during a call. If you do,
you could disconnect the line.
If you get a call and you want to transfer it to someone else, press
Recall
and dial the number of that other
person. This may not work with some phone systems. Refer to your telephone’s instruction manual for more
information. The recall is of “Time break” type.
1
Press
Recall
when you are on the telephone.
2
Enter the phone number to transfer it to someone else.
• In UK, you may have some problems when you try to use BT services.
3
Hang up the handset when the person answers.
Using Caller ID
Many countries have the Caller ID system which enables the receiver to view the numbers or names of callers.
Once you have subscribed to Caller ID services, your machine can display caller information. To switch the
Caller ID feature on:
1
Press
Menu
repeatedly until
SETUP SYSTEM
appears, and press
Enter
.
2
Select
Caller ID
by pressing < or >, and press
Enter
.
3
Choose the desired option, and press
Enter
.
•
On
: Activates the Caller ID feature.
•
On /w Junk Fax
: Activates Caller ID and ignores any fax registered as a junk fax (see "Registering/deleting the junk fax
numbers" on page 6.5.)
•
Off
: Deactivates the Caller ID feature.