Filter
Top Products
–
Wi-Fi timer
: Specify the
Starting time
and the
Ending
time
for Wi-Fi to be automatically connected.
–
Install certificates
: Install authentication certificates.
–
MAC address
: View your device’s MAC address, which
is required when connecting to some secured networks
(not configurable).
–
IP address
: View your device’s IP address (not
configurable).
• WPS push button
: Set up a connection to a WPS (Wi-Fi
Protected Setup) router or other equipment.
• WPS PIN entry
: View the PIN used by your tablet to set
up a PIN-secured connection to a Wi-Fi router or other
equipment (not configurable).
•
Help
: Learn about setting up and using Wi-Fi networks, and
other settings.
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you
can transfer large amounts of data over a Wi-Fi connection.
These devices must be enabled for Wi-Fi Direct
communication. This connection is direct and not via a
hot spot or Wireless Access Point (WAP).
1. From a Home screen, touch
➔
Settings
➔
Connections
tab ➔
Wi-Fi
.
2. Touch the
OFF / ON
button to turn Wi-Fi ON .
3. Touch
Wi-Fi Direct
.
Your device begins scanning for other devices enabled
with Wi-Fi Direct.
4. Enable Wi-Fi Direct on the target device.
5. In the list of available devices, touch the target device.
– or –
If you want to connect to more than one device, touch
Multi connect
and touch each device to which you want
to connect that supports Multi-connect. Touch
Done
.
78