Filter
Top Products
6.3 Security
6.3 Security
You can set the monitor to be accessed only via a password.
.
.
.
1
Press to open the Setup screen.
.
.
.
2
Select Security. Selecting Security will always display the following
password prompt. Enter the current password. The initial password is
0000. This is working only from 1004.17.
.
.
.
3
Set Functions Lock to On.
.
.
.
4
Because the initial password of most devices with a security function is
set to 0000, it is best to change the password. Enter a new password in
the Change PIN field.
.
.
.
5
If you forget your password, perform Reset Settings. The password
will be reset to 0000. Refer to the following section for details about
Reset Settings.
◀ 52 ▶