Filter
Top Products
70
Chapter 7 Controlling the projector
Item Description
Contrast.....................Adjusts picture contrast
Brightness ................Adjusts picture brightness
Color ...........................Adjusts picture color saturation
Tint ..............................Adjusts picture hue
Image adjustment
This function is to adjust the projected picture image and save the image mode. To store the adjusted
value, click Store button, and to load the adjusted value, click Load button.
Item Description
Color temp. ..............
Sets a color temperature mode.
White balance
Red, Green,
Blue ...................... Adjusts each white balance respectively.
Sharpness .................Adjusts picture sharpness.
* When the value of the white balance is changed, the color temp. indicates
"Adj."
Item Description
Gamma ........................
Adjusts brightness of darker part of the picture.
Noise reduction
....... Switches noise reduction mode
Progressive
.................. Switches progressive mode
Reset ...........................Resets the Image adjustment to previous levels.
Store ........................... Stores the Image adjustment values. Select an item
[Image 1 - Image 4] from the pull-down menu and click
Store button.
Load ............................ Loads the Image mode.
Select an image mode from
the pull-down menu and
click Load button. There
may not be available mode
depending on the input
mode as shown in the table
left.
Input source
Image mode Video Computer
Dynamic
4 4
Standard 4 4
Real * 4
Cinema 4 *
Blackboard(Green) 4 4
Colorboard 4 4
Image 1 - 4 4 4
✐ The mark "4" indicates the available image mode in the selected input
source. The error message appears when the disabled image mode
indicated with "*" is selected.