Filter
Top Products
Unit 2: Technical Data
SATO HT200e Operator Manual PN 9001103B Page 2-3
MEDIA
Type Die-Cut & Fan-Fold Labels, Tags (Face Up Stack), Continuous
Minimum Width 1.1 Inches (28 mm)
Minimum Length 0.63 Inches (16 mm)
Maximum Width 2.0 Inches (51 mm)
Maximum Length 4.0 Inches (103 mm)
Maximum Caliper 0.007 Inches (0.18 mm)
Maximum Roll Diameter 2.95 Inches (75 mm) Wound Face-In
Minimum Core Diameter 1.0 Inches (25.4 mm)
SENSING
Reflective Eye-Mark
Continuous Form Sensor not used.
INTERFACE MODULES
Serial Port
RS232C, 4800 to 19.2K BPS
Hardware Ready/Busy Flow Control
Sftware X-On/X-Off Flow Control
Scanner Input RS232C or TTL
CHARACTER FONT CAPABILITIES
MATRIX FONTS
X1 20 dots W x 50 dots H
X2 8 dots W x 20 dots H
X3 13 dots W x 21 dots H
OCR-B 20 dots W x 24 dots H
Price 16 dots W x 24 dots H (Numeric Only)
Outline 1 28 dots W x 48 dots H (Numeric Only)
Outline 2 48 dots W x 68 dots H (Numeric Only)
Outline 3 26 dots W x 56 dots H (Numeric Only)
CHARACTER CONTROL
Expansion Up to 4X in either the X or Y coordinates
Rotation 0, 90, 180, or 270 Degrees
Pitch 0 to 90 dots