870 USE 101 00 V.3.0 283
IV
Concept
At a Glance
Purpose This part describes how to configure an M1 CPU, how to I/O map an I/OBus
network, how to configure a Modbus Plus network with Peer Cop and how to save
to Flash using Concept 2.1.
In This Part This part contains the following chapters:
For Information On... See Chapter... On Page...
Configuring an M1 CPU with Concept 12 285
I/O Mapping an I/OBus Network with Concept 13 337
Configuring a Modbus Plus Network in Concept with Peer Cop 14 345
Saving to Flash with Concept 15 375