Filter
Top Products
Configuring an M1 CPU with Concept
328
870 USE 101 00 V.3
Configuring I/O, Continued
IP Address Type the IP address of the slave module in the IP address column. This address
will be stored in a pulldown menu, so that you may use it in another row by clicking
on the down arrow and selecting it, as shown:
Unit ID If the slave module is an I/O device attached to the specified slave module, use the
Unit ID column to indicate the device number.
Health Timeout Use this column to specify the length of time in ms to try the transaction before
timing out. Valid values are 0 ... 65,000 ms (1 min). To avoid timing out, specify 0.
Rep Rate Use this column to specify how often in ms to repeat the transaction. Valid values
are 0 ... 65,000 ms (1 min). To repeat the transaction continually, specify 0.
Continued on next page